FAQ

The aim of the UQ WiMAX Certification Program is to certify the connectivity of WiMAX products on our network to improve the quality of service offered to our customers.

Prior acquisition of the following certifications is required in order to apply to the UQ WiMAX Certification Program.
1.WiMAX Forum Certification
2.X509 Certification
3.Technical Conditions Compliance Certifications (JATE)
4.Technical Regulations Conformity Certification (TELEC)

Products with a WiMAX chipset installed are the target of this program. Products with no physical network interface are not eligible for this programExamples of products ineligible products include, WiMAX chipsets, software, base stations, and measuring instruments.

The following certifications are required PRIOR to application to the UQ WiMAX Certification Program: WiMAX Forum Certification, X509 Certification, Technical Conditions Compliance Certifications (JATE), Technical Regulations Conformity Certification (TELEC). For more details, please refer to the Guideline for WiMAX Compliant Product Development.

Please apply to the UQ WiMAX Certification Program. For details, please check UQ website or the Guideline for WiMAX Compliant Product Development.

UQ will disclose the list of test items to manufacturers who apply to UQ WiMAX Certification Program. For details, please check our website or [Guideline for WiMAX Compliant Product Development].

It takes about 5 working days to finish UQ-IOT, assuming no debugging.

UQ will disclose the list of test items to manufacturers who apply to UQ WiMAX Certification Program. For details, please check our website or [Guideline for WiMAX Compliant Product Development].

The UQ network is compliant to WiMAX Forum standard specification, so there are no unique UQ requirements. The UQ network test specification will be disclosed after you apply for the UQ WiMAX Certification Program.

You would need to apply to the WiMAX forum to search the specification. Please contact WiMAX forum for more details.

It is mentioned in the [Guideline for WiMAX Compliant Product Development] posted on the UQ website.

Specification of attestation, and IP address allocation are different depending on the MVNO, therefore please contact them in advance.

Currently, IPv6 is not standardized at WiMAX forum; we will consider it based on future trends.

Currently, obtaining location information by WiMAX system is not standardized at WiMAX forum; we will consider it based on future trends.

In general, control devices are devices which can only contract with a particular service provider. In case of retail devices, user can choose their service provider, and so the device must support OMA-DM.

OMA-DM stands for Open Mobile Alliance - Device Management, and it is a device management function provided by the Open Mobile Alliance, which writes subscriber information to the device over a WiMAX wirelessconnection.

This standard certification is provided by WiMAX Forum, with the goal of assuring interoperability of WiMAX devices and networks.

The Open Retail Certification is designed to test WiMAX devices in an end-to-end network IOT environment with common test requirements accepted by WiMAX operators around the globe.

Please check [Guideline for WiMAX Compliant Product Development] for the details.

Acquisition of WiMAX Forum Certification is a prerequisite to apply for the UQ WiMAX Certification Program.

Yes. Please recertify with latest version.

Please take WiMAX Forum, JATE, and TELEC certifications prior to application for UQ WiMAX Certification Program.

YES. As long as it is a target product, no matter which chipset or module you are using, please apply UQ WiMAX Certification Program.

YES. You can use "UQ CERTI" logo after you completed UQ-IOT.

It is optional for manufacturer to display 'UQ CERTIFIED' logo.

Application form and email address for submission is available in our web site. Please fill out the application form with attachment and send them to designated email address.

In case it requires a new WiMAX Forum Certification, please also re-apply to UQ WiMAX Certification.

'UQ CERTIFIED' logo is available to use with products which have completed connectivity tests (UQ-IOT).

It is free of charge to use the logo. Please refer to 'Guideline for UQ CERTIFIED Logo' on display of the logo.

Yes. Please refer to 'Guideline for UQ CERTIFIED Logo' for standard of display.

It is free of charge for application. However, testing is subject to fees.

UQ WiMAX Certified products are displayed available on our web site. For any inquiries,please contact UQ WiMAX Certification Program Office at wix-device@uqc.jp